HEAD-TO-HEAD
TwitterAPIs vs TweetAPI
The split here is the billing model, not the data. TwitterAPIs meters each read and write call at $0.0008, with posting a tweet at $0.0016, and nothing to subscribe to, so your bill tracks exactly what you call. TweetAPI sells monthly tiers that open at $17 for 100K requests. Stay under about 17,000 requests a month and metered billing comes in lower. Climb well past that and TweetAPI's flat rate undercuts it, the catch being a fixed commitment and requests that evaporate unused.
Quick answer
TwitterAPIs is the better pick for variable or low-to-mid volume, and TweetAPI wins only at high, steady traffic. TwitterAPIs meters each read and simple write at $0.0008 per call with no subscription, so any project under roughly 17,000 requests a month pays less. TweetAPI sells fixed monthly tiers from $17 for 100,000 requests, which undercuts metered billing once your volume stays consistently above that line. Both return the same public Twitter and X data.
$0.0008
/callTweetAPI
$17
/moThe short version
Reach for TwitterAPIs when you want zero lock-in, a price you can predict per call, and room to dial usage up or down without paying for idle headroom. Reads run $0.0008 each (~20 tweets), simple writes $0.0008 and posting a tweet $0.0016, you are billed only on what fires, and credits sit on your balance until spent. Reach for TweetAPI when your traffic holds steady above 50K requests a month and a flat subscription rate beats metered pricing. Its $17/mo Pro tier (100K requests) lands under 100K metered calls on TwitterAPIs ($80), but you commit monthly, sit behind a 60 req/min throttle, and forfeit anything you do not use.
What each volume tier actually costs
Low and mid traffic favors TwitterAPIs, since a TweetAPI plan leaves you funding capacity you never touch. High traffic favors TweetAPI, where one fixed monthly fee gets divided across far more requests. The two lines meet near 17,000 requests a month.
| Monthly Volume | TwitterAPIs | TweetAPI | Winner |
|---|---|---|---|
| 1,000 requests | $0.80 | $17 (Pro plan) | About 21x less |
| 10,000 requests | $8 | $17 (Pro plan) | Roughly half the spend |
| 100,000 requests | $80 | $17 (Pro plan) | TweetAPI pulls ahead |
Line-by-line spec sheet
Look past the feature list and the real gap is how you pay. TwitterAPIs meters every call with no commitment, TweetAPI gates access behind monthly tiers and request caps. Both serve reads and writes, though TweetAPI stretches further into edge surfaces like communities, spaces, and encrypted DMs.
| Feature | TwitterAPIs | TweetAPI |
|---|---|---|
| Pricing model | Metered per call, no plan to sign | Tiered monthly plan ($17 to $197) |
| Cost per call | $0.0008 read or write, $0.0016 to post | $0.0001 to $0.00017 (tier dependent) |
| Monthly commitment | None, only metered usage is billed | $17/mo floor |
| Tweets per API call | About 20 | Depends on the endpoint |
| Cost per 1,000 tweets | $0.04 | Varies with tier and usage |
| Free tier | $0.50 in credits (~12,500 tweets) | One-time 100 requests |
| Unused requests | Credits carry over indefinitely | Reset to zero each cycle |
| Auth for read endpoints | Bearer token in the Authorization header | API key in the X-API-Key header |
| Auth for write endpoints | auth_token from a browser or the login route | Login route |
| Total endpoints | 51 | 60+ |
| Rate limits | No platform throttle | 60 to 180 req/min by tier |
| Request cap | None, billing follows the meter | 100K to 2M per month by tier |
| Overage handling | Calls keep flowing, billed as used | Cut off until the cycle resets |
| Credit card required | No | Yes for paid tiers |
One query, two billing worlds
Searching tweets takes a single call on either provider, and the request bodies line up almost word for word. Everything that matters happens at the invoice.
1curl -H "Authorization: Bearer YOUR_API_KEY" \2 "https://api.twitterapis.com/twitter/tweet/advanced_search?query=AI&count=20"34# $0.0008 per read call (~20 tweets)5# Nothing monthly, the meter runs only when you call6# Credits stay on your balance until usedWhere TweetAPI earns its place
Better unit economics at scale: Past 100K requests a month, the flat $17 to $197 tiers drive the effective per-call rate below metered TwitterAPIs billing.
Wider endpoint surface (60+ vs 51): Communities, spaces, encrypted DMs, and other corner-case Twitter features all sit inside TweetAPI's catalog.
A bill you can forecast: A flat tier means the number on the invoice is the same every month no matter how your traffic swings.
Where TwitterAPIs comes out ahead
Nothing to subscribe to: Reads are $0.0008 a call, simple writes $0.0008, posting a tweet $0.0016. Fire 100 calls one month and 50,000 the next, no plan to pick, no money left on the table.
No request ceiling: Hit TweetAPI's monthly cap and the door shuts. TwitterAPIs never blocks you, the meter just keeps counting each call.
Credits that do not expire: Top up $10 and draw it down across six months. On TweetAPI whatever you leave unused is gone when the cycle flips.
No throttle to design around: TweetAPI's 60 to 180 req/min ceilings choke burst ingestion. TwitterAPIs runs no platform-level rate cap, so a 500 req/min backfill is yours if you want it.
An MCP server for AI agents: Wire it into Claude or Cursor through @twitterapis/mcp, or call it from any language. TweetAPI ships no MCP server.
Kinder math on light usage: Run 5,000 calls one month and none the next and you owe $4. The same stretch on TweetAPI is $34, two months of $17.
A free tier worth using: $0.50 in credits, around 12,500 tweets, against TweetAPI's one-time 100 requests. Far more room to actually test.
No card to get started: Register and your free credits land right away. TweetAPI wants a card on file before any paid tier.
Pick the one that fits your traffic
TwitterAPIs is the call when you...
- ✓Would rather skip a monthly plan and any lock-in
- ✓See usage that swings or is hard to forecast
- ✓Stay under roughly 17,000 requests a month
- ✓Want a balance that never times out
- ✓Need to flex up and down without switching tiers
- ✓Like starting free with no card on file
TweetAPI is the call when you...
- •Hold steady at 50K to 2M requests every month
- •Want one fixed line item you can budget against
- •Depend on edge endpoints like communities, spaces, or encrypted DMs
- •Favor a subscription over paying per request
Still shopping the field?
TweetAPI is just one name on the list. If you have not made the call yet, line TwitterAPIs up against TwexAPI and twitterapi.io, the other two metered options on the board. Or skip ahead to the full TwitterAPIs pricing and read the per-endpoint rate card.
Common questions: TwitterAPIs vs TweetAPI
That turns on how much you call. Under roughly 15,000 requests a month, TwitterAPIs wins because each read call is $0.0008 (source: twitterapis pricing) and there is no floor to clear. TweetAPI starts at $17/mo for 100K requests, so anyone touching fewer than ~17,000 is paying for headroom they never use. Once you sit above 100K requests a month, TweetAPI's flat tiers drop the effective per-call rate below metered billing.
TweetAPI stops serving calls until your next cycle opens. There is no buy-more button, so the only way forward is bumping up a tier. TwitterAPIs sets no ceiling at all, you keep issuing requests and the meter keeps counting.
They cannot. Whatever you leave on the table at TweetAPI is gone when the billing cycle flips. TwitterAPIs credits never lapse, so a balance sits there until a call actually spends it.
At the top of the volume curve TweetAPI can come out ahead. Its Mega plan is $197/mo for 2 million requests, and that same load metered on TwitterAPIs would land near $1,600. The trade is real though: TweetAPI throttles you at 180 req/min and walls you off the moment you cross the monthly cap, while TwitterAPIs leaves both the rate and the volume wide open.
TweetAPI hands out 100 requests once as a trial, and that is it, no monthly refresh. TwitterAPIs starts you with $0.50 in credits, which is 625 read calls or about 12,500 tweets, asks for no card, and the balance never times out.
TweetAPI lists 60+ endpoints, reaching into communities, spaces, and encrypted DMs. TwitterAPIs ships 51 endpoints aimed at the daily-driver surface: tweets, threads, users, search, followers, and write actions such as like, retweet, bookmark, and follow. For most builds that is the whole job, minus the subscription handcuffs.
TwitterAPIs, clearly. Burn 5,000 calls this month and nothing next month and your bill reads $4 total. The same two months on TweetAPI cost $34, two rounds of $17, including the month you stayed idle. No floor, no expiry on TwitterAPIs.
Skip the plan. Pay by the call.
$0.0008 per read call (~20 tweets), $0.0008 per write action, $0.0016 to post a tweet. $0.50 in free credits. No monthly fee, no card required.
Next read
Continue exploring related pages:
TwitterAPIs pricing
Brand pricing page with endpoint-level costs and quick totals.
Twitter API v2 pricing vs TwitterAPIs
Side-by-side endpoints, pricing, auth, and response shape, same data, 100x cheaper.
How to get a Twitter (X) API key
Step-by-step walkthrough of the X developer console plus a 30-second alternative.